Blog

Are You Still Using POTS Lines for Monitoring?

Published on January 14th, 2022

If you still use POTS (Plain Old Telephone Service) lines to communicate with your central station monitoring company, you are using outdated technology. In the before time (as my father likes to say) POTS lines were the most reliable means of transmitting an alarm signal. However, telecommunications carriers like Verizon and AT&T are abandoning their support of copper-based phone networks in favor of fiber optic lines. New phone lines are almost all VoIP (Voice Over Internet Protocol). While VoIP is a fine technology for providing phone connectivity, it may not be when it comes to your Fire Alarm Signal.

In this editorial, I hope to shed light on an increasingly common issue that has been affecting the real estate industry as it pertains to alarm signal transmissions. I will also explain the importance of switching to modern technology for alarm signal transmission, like Internet and Cellular.

THE DIFFERENCE BETWEEN POTS AND VOIP
Traditionally, POTS lines were dedicated pairs of twisted copper wires, which worked by transmitting voltage through the copper wire connection. The phone companies would provide the support to those lines including power. This is why when you lost power in a storm, you would still have a phone line! This transmission method was highly reliable and ideal for Fire and Burglar Alarm Signal transmission.

Over the last two decades phone companies have spent an enormous amount of resources converting their networks to fiber optic, making VoIP the supported technology. VoIP transmits signals by compressing the data and sending it over an Internet network. Since VoIP sends signals as a compressed data, by the nature of its technology, it changes the format of the signal. VoIP lines may be approved for use in jurisdictions as long as they are functioning on an MFVN (Managed Facilities Voice Network).

THE ISSUE WITH POTS AND VOIP REGARDING FIRE/BURGLAR ALARM SIGNALS
Although VoIP and POTS are indistinguishable for the purpose of a phone call, for alarm signal transmission, VoIP is not the same. The alarm signal is altered by the nature of VoIP technology therefore; it may not be as efficiently received by your monitoring center.

POTS lines being switched to VoIP lines by phone providers presents an extremely common problem that has been affecting buildings for years. This is usually due to the phone company converting from POTS to VOIP lines. Customers don’t receive notice of the conversion, which tends to cause a lot of stress and frustration for the property managers, who are all of a sudden facing a potential violation from the city. Fortunately, there are ways to avoid this POTS/VoIP issue completely.

MAKE THE SWITCH TO INTERNET AND CELLULAR COMMUNICATION
While POTS was once an efficient and reliable methodology to transmit signals, its recent conversion to VOIP, combined with the increased reliability of newer technologies makes POTS continued use less desirable. In fact, the standards and codes for fire alarm signal transmission are now reflecting this by indicating that each system should have two different technologies and two paths to get a fire alarm signal out.

With POTS lines becoming extinct (both Verizon and AT&T have said by the end of 2022), every building that still uses POTS lines will eventually have to switch to a newer technology in order to receive reliable connectivity for Alarm Signal Transmissions. The good news is that IP (internet protocol) and Digital Cellular are available and are approved transmission technologies. Internet and Cellular transmission will provide faster, safer and more reliable connectivity to send signals from your premise to our central station monitoring facilities. Best of all, Internet and cellular technologies can save you $60-$100 per month because you can eliminate those old phone lines.

SMG SECURITY is encouraging all of our customers to make the switch to IP/Digital Cellular now to avoid potential issues with connectivity in the future, thereby keeping your premise and tenants safe.

Back to News

For Questions, Comments or to talk to our Sales & Service Team: 847-593-0999

    Please reach out to us if there is any additional information you need and we will respond to you as soon as possible.

    Address

    120 King Street
    Elk Grove Village, IL 60007

    Phone

    847.593.0999

    Business Hours

    Mon - Fri: 8:00 am - 5:00 pm
    Saturday: 9:00 am - 2:00 pm